Magnesite pulverizer

The use of magnesite:
Magnesite is a mineral with the chemical formula MgCO3 (magnesium carbonate). It occupies one end of a solid solution series with siderite (FeCO3), as the iron ion Fe2+ substitutes for the magnesium ion Mg2+. Calcium, manganese, cobalt and nickel may also occur in small amounts. Magnesite can be used as a slag former in steelmaking furnaces, in conjunction with lime, to protect the magnesium oxide lining. It can also be used as a catalyst and filler in the production of synthetic rubber and in the preparation of magnesium chemicals and fertilizers.
 
CLIRIK magnesite pulverizer, which is designed by our engineers and technicians on the basis of multiple innovation, test and experience over two decades, has absorbed many advantages of home and abroad mill manufacturing technique. It has been proved by thousands of customers that our machine has outstanding features and stable quality. CLIRIK magnesite pulverizer can upgrade its production and the additional value which is suitable for our customer to use. It is the ideal equipment for fine milling.
 
How does magnesite pulverizer work?
1) After crushed by hammer crusher, the large materials become smaller pieces and are sent to the magnesite pulverizer.
2) When the magnesite pulverizer is at work, the granulated materials are crushed and grinded by the rollers into particles below 47micron.
3) The high-pressure air blower constantly inhales air within the magnesite pulverizer.
4) Along with the high speed airflow, micronized materials are brought to the classifier.
5) The qualified particles are screened and driven into the cyclone powder collector, finally exit from the discharging valve at the bottom;
6) A small proportion of the fine powders, with airflow, moving to the dust cleaner. Filtered clean air will be emitted from the air outlet of muffler in the end.
 
Advantages and Features of magnesite pulverizer:
l、 High efficiency
Under the same finished final size and the same motor power, the capacity of magnesite pulverizer is twice as much as jet mill, mixing grinder and ball mill.
2、Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.
3、High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
4、 High fineness and flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness can reach D97≦5um.
5、Environment-friendly
The application of pulse deduster and muffler greatly alleviates dust pollution and noise.