NEWS&EVENTS

HGM series stone pulverizer is the new type mining equipment for making micro powders, fine powders,which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.
 
The basic maintenance of stone pulverizer from the seven aspects:
 
1. stone pulverizer bearing shoulder the entire load of the machine, so good lubrication of the bearing life of a great relationship.It directly affects the life of the machine and the operating rate, which requires the injection of lubricating oil must be cleaned, the seal must be good.
  
2, the newly installed tire prone to loosening must always be checked.
  
3, pay attention to the various parts of the stone pulverizer working properly.
  
4, pay attention to check the wear parts wear, pay attention to the replacement of worn parts of stone pulverizer.
  
5, put the base of the plane of the active device should be out dust and other materials can cause the machine to encounter material that can not be broken TSP micronized. The grinding activities bearings can not be on the bottom shelf mobile, resulting in a serious accident.
  
6, bearing temperature rise should immediately stop and check to eliminate them.
  
7, the gears in operation if the impact of the sound should be immediately stopped to check and eliminate.For small mill, feeding basically artificial, remember not erratic less. Feeding will cause excessive wear powder machine blocking material, affecting the normal operation, resulting in lower yields.                                                      
 
It must be noted that the work of the stone pulverizer is grinding roller and grinding ring in close contact, extrusion grinding milling, because it is metal to metal contact, so the body can not have metal objects, otherwise it will damage the grinding roller and grinding ring and other parts.