Gallery Language

No.19Fuqing Rd,Shanghai China

E-mail: info@clirik.com Tel: 86-21-2023 6178 Fax: 86-21-5897 4855
European gypsum pulverizer succ

European successful case: gypsum pulverizer CLIRIK gypsum pulverizer has been sold to Brazil, Pakista

New Calcite Grinding Mill Custo

Clirik HGM serials Grinding mill is the best to process calcite, Pakistan have many resourse , the ca

Company News

HOME > NEWS&EVENTS > Company News >
Grinding pulverizer for magnesite 2013-05-15 09:32

Grinding pulverizer for magnesite: the granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H depending on the final size and the grinding materials.
 
Magnesite is a mineral with the chemical formula MgCO3 (magnesium carbonate). It occupies one end of a solid solution series with siderite (FeCO3), as the iron ion Fe2+ substitutes for the magnesium ion Mg2+. Calcium, manganese, cobalt and nickel may also occur in small amounts. Magnesite can be used as a slag former in steelmaking furnaces, in conjunction with lime, to protect the magnesium oxide lining. It can also be used as a catalyst and filler in the production of synthetic rubber and in the preparation of magnesium chemicals and fertilizers.
 
Grinding pulverizer for magnesite mainly consist of main unit, classifier, dust cleaner, powder collector, blower, muffler, hammer crusher (can be replaced by jaw crusher), bucket elevator, sound-proof room, storage hopper, vibrating feeder and so on.
 
Working Principle of grinding pulverizer for magnesite:
●The crusher will crush the big materials into small ones, and then the elevator will send them to the hopper.
●The vibrating feeder will send the materials to the middle of first dial evenly.
●The motor of main equipment drives the main shaft and dial through reducer, and the dial drives numbers of rollers moving in the ring channels via pins.
●The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings.
●The high pressure centrifugal blower will inhale air from outside and bring the crushed materials to classifier.
●The rotating turbo in the powder collector will make the coarse materials return to the mill and regrounded, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it.
●The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

About US | Products | News | Project Case | Contact | Site Map

© 2013 Copyright by Shanghai Clirik Machinery Co., Ltd.